Laserfiche WebLink
Objective Design Standards for Housing Sites <br /> B1. Attached Rowhouse/Townhouses (14-25 du/ac) <br /> to. <br /> K ' ? <br /> sliiiii <br /> T <br /> Attached rowhouse/townhouses are units typically situated in a row of at least three or more units where <br /> there is no separation between units. These can be designed as either front- or rear-loaded. Front-loaded <br /> rowhouse/townhouses are those which have a garage located in the front of the house,whereas rear-loaded <br /> have the garage located at the back of the lot that can be accessed by a rear drive. <br /> Density Range/Typical Parcel Size <br /> Stories <br /> 14-25 du/ac,3-3.5 acres <br /> (Approximately 40-88 units for a 3-3.5ac development) 3 story <br /> Features: <br /> • Generally uniform massing within individualized appearance <br /> • Front-loaded with the garage facing the street or"front" of the property,or rear-loaded with garage <br /> facing the rear of the property <br /> • Greater efficiency of space without side yards and may provide for greater densities on larger sites <br /> • Private open space for each unit is typically provided by a front patio or balconies <br /> • Typical built density: between 14-25 units per acre <br /> • The design focus should be on an overall building: attached units in a row <br /> • Units organized around "public" spaces and sites around common spaces <br /> City of Pleasanton -Appendix Page 2 - DRAFT: December 14, 2022 <br />