RES 231386 - Laserfiche WebLink

Objective Desian Standards for Housina Sites A11. Utility and Service Area Location and Design Utility and service functions should be completely contained and their impacts on development aesthetics and pedestrian safety should be mitigated. Buildings and site plans should be organized to minimize the impact of servicing functions and utilities on streets,open spaces,and paseos. pt4 ' Design Standards All Housing Site Development A11.1 Development shall provide enclosures sized adequately to meet minimum standards for Pleasanton's source separated recycling program for refuse. Buildings shall anticipate provisions for at least one of the following options,with provision made for collecting and separating different waste streams(non-recyclable waste,recyclable waste,and green/food waste)in all cases: a. Individual containers(carts)for each unit and a designated storage location enclosed by low walls or building walls or in single family homes when space is not provided in a garage or carport,within a side or rear yard,behind an opaque fence and gate or otherwise screened from the public street. b. Individual containers(carts)for each unit and a designated clear storage area within individual unit garages. c. Opaque,roofed enclosure for refuse bins built of durable materials and designed to harmonize with the proposed architecture. Freestanding enclosures shall be allowed to encroach at interior side and rear setbacks only. d. Appropriately sized trash room to meet requirements for collection of different waste streams inside the proposed building. A11.2 If the applicant has an interior trash room in which bins will remain in until pickup,or if an exterior enclosure is designated for staging refuse bins or carts,the applicant shall provide a letter from the city's solid waste franchisee confirming that the required number of bins or carts can be collected from the proposed onsite staging area. City of Pleasanton -41 - Adopted May 2, 2023