Laserfiche WebLink
Objective Design Standards for Housina Sites <br /> Single Family Tract Development <br /> Single Family Homes and Primary Structures of Multiple Single Family Development on the same <br /> parcel shall comply with the following massing standards: <br /> B1.3 Elevations fronting Public Streets, Internal Streets, Paseos,Open Spaces,or the City of <br /> Pleasanton Trail System shall limit any continuous plane to 40%of the total fagade length <br /> through the use of recesses or projections not less than three feet in depth from the adjacent wall. <br /> B1.4 Garages shall comply with the following standards: <br /> a. Garages shall not be oriented to face Paseos or the city public Trail System <br /> b. Garages facing Public Streets and Internal Streets shall be limited to <br /> i. 30%of the total width of the home facade, for lot frontages in excess of 80 feet <br /> ii. 40%of the total width of the home fagade, for lot frontages between 60 to 80 feet <br /> iii. 50%of the total width of the home fagade, for lot frontages less than 60 feetor 22 <br /> feet garage interior clear width,whichever is greater <br /> iv. For parcels under 10,000 square feet three-car garages shall use tandem parking for <br /> third space within the garage. <br /> B1.5 a. Residential floor area for each floor above the ground floor shall not exceed 75%of the <br /> ground floor area inclusive of any attached garages. <br /> b. Floor area located under sloping roofs shall be counted in accordance with the ANSI Z765 <br /> standard: <br /> L Residential floor area above the ground floor must have a minimum clearance of 5 <br /> feet above the finished floor <br /> ii. 50%of the floor area above the ground floor must have ceilings at least 7 feet above <br /> the finished floor. <br /> City of Pleasanton -45 - Adopted May 2, 2023 <br />