Laserfiche WebLink
Objective Design Standards for Housing Sites <br /> APPENDIX A <br /> MULTIFAMILY BUILDING TYPES <br /> Introduction <br /> Property owners and developers of multifamily projects are encouraged to"mix and match"among the <br /> following Building Types in order to achieve the required minimum average density,and to provide the <br /> varied building character desired by the City.It is anticipated that more than one building type will be <br /> built on large parcels,depending on the location,street frontage,mix of uses,and desired parking ratios. <br /> It is left to the applicant where and how to combine the Building Types listed below. <br /> While some of the prototypes described in the following pages are typically built at density ranges which <br /> may exceed the densities allowed on the designated Housing Element Sites, such prototypes can be <br /> mixed with lower density building types on the site to achieve an average site density consistent with the <br /> maximum densities allowed in Table 2.1. <br /> The following multifamily building types and their average densities are listed in this document for <br /> reference only: <br /> Al.Attached Rowhouse/Townhouses(14-25 du/ac) <br /> A2.Garden Style with Surface parking(20-25 du/ac) <br /> A3.Tuck Under Podium(25-40 du/ac) <br /> A4.Townhouses/Flats with Podium Parking(40-60 du/ac) <br /> A5. Residential Wrap Building with Parking Structure(40-70 du/ac) <br /> A6. Residential Buildings with Off-Site Parking District(50-80 du/ac) <br /> AT Mixed-Use Buildings <br /> A8. Retail Buildings(Stand Alone) <br /> A9. Live/Work <br /> City of Pleasanton - Appendix Page 1 - Adopted May 2, 2023 <br />