|
Cam Q Series Trailer Brakes 3/Unl/P, 1/Unl/L
<br />Cam P3 2/200/P
<br />Cam 3/Unl/P
<br />Q+ Drum Brake™ 3/Unl/P&L
<br />Q+ Drum Brake ™3 2/200/P&L
<br />ASA 3/Unl/P
<br />ASA3 2/200/P
<br />Hubs/Cast Drums and Other Wheel-end Components 1/Unl/P
<br />Hydraulic Disc Brakes 1/Unl/P
<br />All Other Brakes 1/Unl/P
<br />STEELite X30 Drum Brake™2 12-Years or Wearable Life/P
<br />EX+ Air Disc Brake™ 2/Unl/P&L
<br />1 Includes: bushing, seal, cam, ASA lubrication and wear coverage of 1/Unl/P.
<br />2 Based on stamped wear diameter max.
<br />3 Applies to Tour Bus and Cross Country Coach only.
<br />Beam and Brackets1 5/Unl/P, 1/Unl/L
<br />Wheel End Systems2
<br /> Standard System3 1/Unl/P&L
<br /> AxlePak54 5/P&L
<br /> AxlePak75 7/P&L
<br />1 9000 Series is 3/Unl/P, 1/Unl/L
<br />2 Includes hub, wheel seals and wheel bearings—all systems require annual
<br />inspections and proper documentation to ensure full coverage.
<br />3 When installed by Meritor.
<br />4 When specified with AxlePak5 wheel end system, coverage on MTIS thru-tee and
<br />stator is 5/Unl/P, 1/Unl/L.
<br />5 When specified with AxlePak7 wheel end system, coverage on MTIS thru-tee
<br />and stator is 7/Unl/P, 1/Unl/L.
<br />(For brake components and ABS coverage, refer to appropriate
<br />product warranties.)
<br />Beam & Brackets 6/Unl/P, 1/Unl/L
<br />Wheel End Systems1
<br /> Standard System 1/Unl/P&L
<br /> AxlePak7 7/P&L
<br /> Beam and Brackets 7/P, 1/L
<br />1 Includes hub, wheel seals and wheel bearings—all systems require annual
<br />inspections and proper documentation to ensure full coverage.
<br />MPA38/40 (Tandem Axle Parallelogram)1
<br /> Major Structural Components 5/Unl/P, 1/Unl/L
<br /> Curbing Damage Warranty2 5/500/P, 1/100/L
<br /> Height Control Valve 1/Unl/P&L
<br /> Shock Absorbers 2/Unl/P&L
<br /> Air Springs 2/Unl/P, 1/Unl/L
<br /> Bushings 5/P, 3/L
<br /> PinLoc Air Controls 1/Unl/P&L
<br /> PinLoc Air Actuator 3/Unl/P&L
<br />MPA20 (Single Axle Parallelogram)
<br /> Major Structural Components 5/Unl/P, 1/Unl/L
<br /> Height Control Valve 1/Unl/P&L
<br /> Shock Absorbers 2/Unl/P&L
<br /> Air Springs 2/Unl/P, 1/Unl/L
<br /> Bushings 5/P, 3/L
<br />MTA (Trailing Arm)
<br /> Major Structural Components 5/Unl/P, 1/Unl/L
<br /> Height Control Valve 1/Unl/P&L
<br /> Shock Absorbers 2/Unl/P&L
<br /> Air Springs and Rebound Straps 2/Unl/P, 1/Unl/L
<br /> Bushings3 5/Unl/P, 3/Unl/L
<br />(For axle and ABS coverage, refer to appropriate product warranties.)
<br />1 Fastener torque coverage is limited to 2/Unl/P&L when torqued by Meritor
<br />2 “Curbing damage” is defined as deformation (bending, buckling, or breakage),
<br />caused by sudden impact with a curb or similar fixed object. Damage to the
<br />RideSentry slider box (the suspension sliding subframe, consisting of the frame
<br />rails, crossmembers, and central A-frame assembly), caused by accidental trailer
<br />impact with a curb or similar fixed object, is eligible for warranty coverage.
<br />Damage to other components or damage resulting from collision with another
<br />vehicle, rollover or fire is not covered under this provision. Warranty is not
<br />transferrable to another trailer VIN, and coverage does not apply if the trailer
<br />is deemed to be a total loss, scrapped, or otherwise not salvageable.
<br />3 Raw wood applications 3/Unl/P, 1/Unl/L
<br />MTIS Components 5/Unl/P, 1/Unl/L
<br />TQ, TQD, TR, TRD Beam and Brackets1 3/Unl/P, 1/Unl/L
<br />MC14002, MC16003, FH946 2/Unl/P&L
<br />(For brake components and ABS coverage, refer to appropriate
<br />product warranties.)
<br />1 3/Unl/P&L if sold with PreSet by Meritor.
<br />Brake Components
<br />Trailer Axles
<br />Chassis Axles (2000 Series/ChassiPak)
<br />Trailer Air Suspension Systems
<br />Meritor® Tire Inflation System
<br />TAG/Pusher Axles
<br />6
<br />GENERAL SERVICE WARRANTY INFORMATION
|