Laserfiche WebLink
1 <br />Compatibility and delivery check <br />Contents of the package: panel holder, control cable, mounting screws (QTY 2). Check that all items are <br />present and there are no signs of damage. Compatible control panels are: ACH-AP-H, ACH-AP-W, ACS-AP-S, <br />ACS-AP-I, ACS-BP-S, and ACS-AP-W. <br />Installation instructions <br />1. Cut a hole in the cabinet door using the template on the next page as a guide. <br />2. Insert panel holder into the cutout. <br />3. Secure panel holder to door using supplied hardware. Torque to 1,5 N•m (13.3 in-lbs). <br />4. Install control cable into the panel holder. The control cable has a standard and special RJ45 connector. <br />Feed the standard RJ45 connector through the panel holder and snap the special RJ45 connector into the <br />panel holder. <br />5. Attach the control panel. <br />6. Secure the control cable in a manner to eliminate mechanical stress to the panel holder and control cable. <br />7. Connect the standard RJ45 end of the cable to the appropriate connector. See the drive hardware manual. <br />1 <br />2 3 <br />4 <br />Mounting Screw <br />1.5 N•m max <br />5 <br />Special RJ45 connector end <br />Options for ABB drives, converters and inverters <br />Installation guide <br />DPMP-06/07 mounting platform for control panels <br />Page 225 of 658