CITY COUNCIL REGULAR AGENDA PACKET

Attachment 1 Exhibit B Page 42 of 64 20.26.380 Section 5.408 amended – Construction Waste Reduction, Disposal and Recycling. 20.26.010 California Green Building Standards (CALGreen) Code adopted. There is adopted by reference that certain code known as the California Green Building Standards (CALGreen) Code at Title 24 California Code of Regulations Part 11 (2025 edition), as more particularly described in this section, except such provisions that are amended, modified or deleted in this chapter, and the same is adopted and incorporated as fully as if set out in this chapter. A copy of said code is available for use by the public at the City of Pleasanton's Building Division. 20.26.020 Section 101.3 Scope amended. Section 101.3 Scope is amended to read as follows: 101.3 Scope. The provisions of this code shall apply to the planning, design, operation, construction, use and occupancy of every newly constructed building or structure, unless otherwise indicated in this code, throughout the State of California. Any "Newly constructed building or structure" subject to CALGreen and this chapter does not include renovations, repairs or additions, to historic buildings, defined as any building listed or eligible for listing on a national, state or local register or listing of historic resources. It is not the intent that this code substitute or be identified as meeting the certification requirements of any green building program. 20.26.030 Section 107 added – Local Enforcing Agency. Section 107 is added to read as follows: 107.1 Local Enforcing Agency. The Building Division of the City of Pleasanton shall enforce all the provisions of this law, this code and the other rules and regulations promulgated by the Building Standards Commission, the Department of Housing and Community Development or the Division of the State Architect, and Chapter 20.04, the Pleasanton Building Administrative Code. 20.26.040 Chapter 2 Definitions – amended. Chapter 2 Definitions are amended to read as follows: AUTOMATIC LOAD MANAGEMENT SYSTEM (ALMS). A control system designed to manage load across one or more electric vehicle supply equipment (EVSE), circuits, panels and to share electrical capacity and/or automatically manage power at each connection point. ALMS systems shall be designed to deliver no less than 3.3 kVa (208/240 volt, 16-ampere) to each EV Capable, EV Ready or EVCS space served by the ALMS, and meet the requirements of California Electrical Code Article 625. The connected amperage to the building site for the EV charging infrastructure shall not be lower than the required connected amperage per California Green Building Standards Code, Title 24 Part 11. ELECTRIC VEHICLE CHARGING STATION (EVCS). A parking space that includes installation of electric vehicle supply equipment (EVSE) at an EV Ready space. An EVCS space may be used to satisfy EV Ready space requirements. EVSE shall be installed in accordance with the California Electrical Code, Article 625. Page 53 of 376