Laserfiche WebLink
Attachment 1 Exhibit B <br />Page 44 of 64 <br />INDUSTRIAL PROCESS HEAT. A process or manufacturing equipment for which sustained <br />temperatures typically in excess of three hundred fifty degrees Fahrenheit are required and demonstrably <br />not achievable with commercial electric equipment. <br /> <br />LEVEL 2 EV CAPABLE. A parking space provided with electrical infrastructure that meets the <br />following requirements: <br />i. Conduit that links a listed electrical panel with sufficient capacity to a junction box or receptacle <br />located within three (3) feet of the parking space. <br />ii. The conduit shall be designed to accommodate at least 8.3 kVa (208/240 volt, 40-ampere) per <br />parking space. Conduit shall have a minimum nominal trade size of 1 inch inside diameter and <br />may be sized for multiple circuits as allowed by the California Electrical Code. Conduit shall be <br />installed at a minimum in spaces that will be inaccessible after construction, either trenched <br />underground or where penetrations to walls, floors, or other partitions would otherwise be <br />required for future installation of branch circuits, and such additional elements deemed necessary <br />by the Building Official. Construction documents shall indicate future completion of conduit <br />from the panel to the parking space, via the installed inaccessible conduit. <br />iii. The electrical panel shall reserve a space for a 40-ampere overcurrent protective device space(s) <br />for EV charging, labeled in the panel directory as “EV CAPABLE.” <br />iv. Electrical load calculations shall demonstrate that the electrical panel service capacity and <br />electrical system, including any on-site distribution transformer(s), have sufficient capacity to <br />simultaneously charge all EVs at all required EV spaces at a minimum of 40 amperes. <br />v. The parking space shall contain signage with at least a 12” font adjacent to the parking space <br />indicating the space is EV Capable. <br /> <br />LEVEL 1 EV READY. A parking space that is served by a complete electric circuit with the following <br />requirements: <br />i. A minimum of 2.2 kVa (110/120 volt, 20-ampere) capacity wiring. <br />ii. A receptacle labeled “Electric Vehicle Outlet” or electric vehicle supply equipment located within <br />three (3) feet of the parking space. If EVSE is provided the minimum capacity of the EVSE shall <br />be 16-ampere. <br />iii. Conduit oversized to accommodate future Level 2 EV Ready (208/240 volt, 40-ampere) at each <br />parking space. <br /> <br />LEVEL 2 EV READY. A parking space that is served by a complete electric circuit with the following <br />requirements: <br />i. A minimum of 8.3 kVa (208/240 volt, 40-ampere) capacity wiring. <br />ii. A receptacle labeled “Electric Vehicle Outlet” or electric vehicle supply equipment located within <br />three (3) feet of the parking space. If EVSE is provided the minimum capacity of the EVSE shall <br />be 30-ampere. <br /> <br />LOW POWER LEVEL 2 EV READY. A parking space that is served by a complete electric circuit <br />with the following requirements: <br />i. A minimum of 4.1 kVA (208/240 Volt, 20-ampere) capacity wiring. <br />ii. A receptacle labeled “Electric Vehicle Outlet” or electric vehicle supply equipment located within <br />three (3) feet of the parking space. If EVSE is provided the minimum capacity of the EVSE shall <br />be 16-ampere. <br />iii. Conduit oversized to accommodate future Level 2 EV Ready (208/240 volt, 40-ampere) at each <br />parking space. <br />Page 55 of 376