Planning Commission meeting agenda packet 7-9-25

City of Pleasanton—Vineyard Avenue Residential Project Consistency Checklist 15183 Consistency Checklist 40 1. All exposed surfaces (e.g., parking areas, staging areas, soil piles, graded areas, and unpaved access roads) shall be watered two times per day. 2. All haul trucks transporting soil, sand, or other loose material off-site shall be covered. 3. All visible mud or dirt track-out onto adjacent public roads shall be removed using wet power vacuum street sweepers at least once per day. The use of dry power sweeping is prohibited. 4. All vehicle speeds on unpaved roads shall be limited to 15 miles per hour (mph). 5. All roadways, driveways, and sidewalks to be paved shall be completed as soon as possible. Building pads shall be laid as soon as possible after grading unless seeding or soil binders are used. 6. All excavation, grading, and/or demolition activities shall be suspended when average wind speeds exceed 20 mph. 7. All trucks and equipment, including their tires, shall be washed off prior to leaving the site. 8. Unpaved roads providing access to sites located 100 feet or further from a paved road shall be treated with a six- to 12-inch layer of compacted layer of wood chips, mulch, or gravel. 9. Publicly visible signs shall be posted with the telephone number and name of the person to contact at the lead agency regarding dust complaints. This person shall respond and take corrective action within 48 hours. The Air District’s General Air Pollution Complaints number shall also be visible to ensure compliance with applicable regulations. The proposed project’s required implementation of the BAAQMD’s BCMMs listed above for the project’s construction activities would help to minimize construction-related fugitive dust emissions to a less-than-significant level. In addition, the proposed project would be required to comply with the provisions of Chapter 9.21, Construction and Demolition Debris, of the City’s Municipal Code, which would be ensured through preparation and approval of a waste management plan (WMP). The WMP would include project information, the hauling and disposal method, and the estimated quantities of materials to be salvaged and/or disposed. In addition, the AQ/GHG Assessment used the California Emissions Estimator Model (CalEEMod) Version 2022 to estimate emissions from on-site construction activity, construction vehicle trips, and evaporative emissions, as well as operational emissions. The project land use types and size were input to CalEEMod, as well as operational year, traffic information, and other