Planning Commission meeting agenda packet 7-9-25

Page 18 Fee. The fee amount is available in the City’s adopted Master Fee Schedule and is payable prior to subdivision map approval. (Address this condition prior to subdivision map approval) 81. All streets, utilities, and facilities within the development including A Street and B Court shall be designated as private and maintained by the HOA. (Address this condition prior to subdivision map approval) Design 82. ADHERENCE TO CITY STANDARDS: All public improvements shall be designed and constructed in conformance with the City of Pleasanton Municipal Code and the City’s adopted Standard Specifications and Details in effect at the time of issuance of the permit(s). Said standards are available for download at: https://www.cityofpleasantonca.gov/our- government/public-works/engineering/ (Address this condition during all aspects of design and construction) 83. STREETLIGHTS: Streetlights , to be owned and maintained by the City, shall include a light- emitting diode (LED) lamp and driver compliant with UL 1598. The luminaire must be dark-sky compliant with correlated color temperature (CCT) not greater than 4,000K. For safety lighting at signalized intersections, electricity for the lights shall come from a dedicated circuit fed from the traffic signal’s electrical panel. The circuit shall be controlled by a photocell that energizes the light only during nighttime hours. For free-standing streetlights on dedicated poles, the electricity shall be fed from an unmetered secondary electrical circuit provided by PG&E. A photocell on each fixture shall control the operation of the lamp. Free-standing fixtures are subject to PG&E’s LS2A “Customer-owned Street and Highway Lighting” rate schedule. The applicant shall provide verification of total energy consumption of luminaire to PG&E prior to connection. Billing for LS2A electricity consumption must be transferred to the City upon acceptance of the streetlight installation. Streetlights must have an electronic type photo control meeting ANSI standard C136.10 with a turn on value of 1.0 foot-candles and a turn off value of 1.5 foot-candles. Electro-mechanical or thermal type photo controls and not allowed. Streetlights must have badge numbers on each pole. Badge numbers must be affixed to the pole 9 feet from ground level facing the street-side and be legible from the ground. A streetlight wattage sticker needs to identify the actual total wattage consumed, be visible from the ground, be of a size and type acceptable to PG&E showing total fixture energy use in watts and must be installed on each fixture. Streetlights connected to existing joint utility poles are generally not allowed unless authorized by the City Engineer.