CITY COUNCIL REGULA MEETING AGENDA PACKET _Revised_ 6-2-26

Ordinance No. 2306 Page 15 of 35 Page 15 of 35 41. CONDITIONS OF APPROVAL: The project developer shall provide all initial buyers with copies of the final project conditions of approval. BUILDING AND SAFETY DIVISION – 925-931-5300 42. PHASED OCCUPANCY: If building occupancy is proposed to be phased, the project developer shall submit a phasing plan to the Chief Building and Safety Official for review and approval. 43. BUILDING SURVEY: The project developer shall submit a building survey and/or record of survey and a site development plan in accordance with the provisions of Chapter 18.68 of the PMC. These plans shall be approved by the Chief Building Official prior to building permit issuance. The site development plan shall include all required information to design and construct site, grading, paving, drainage, and utilities. 44. PAD AND SETBACK CERTIFICATION: The project developer shall submit a pad elevation certification prepared by a California licensed land surveyor or registered civil engineer to the Chief Building Official and Director of Community and Economic Development certifying the pad elevations and building locations (setbacks) are conforming to the approved plans, prior to receiving a foundation inspection for the structures. PUBLIC WORKS DEPARTMENT – 925-931-5650 45. CONDITIONS OF APPROVAL: The Conditions of Approval shall be depicted on a plan sheet(s) in the improvement plans. 46. ENGINEERING DIVISION FEES FOR SERVICE: The Engineering Division assesses fees for services including plan-check, permit issuance, and inspection according to the City’s adopted Master Fee Schedule. These fees are separate and distinct from fees assessed by the Community Development Department (including Planning and Building Division fees). The project developer is responsible for payment of all Engineering Division fees prior to services rendered or permit issuance, whichever is first. (Address this condition prior to plan approval). Design 47. DESIGN PER CITY STANDARDS: All public improvements shall be designed in compliance with the City Standard Specifications and Details in effect at the time of the issuance of the encroachment, grading, or subdivision permit, whichever occurs first. All public improvements shall be designed in conformance with the City of Pleasanton Municipal Code and the City’s adopted Standard Specifications and Details in effect at the time of issuance of the permit(s). Said standards are available for download at: https://www.cityofpleasantonca.gov/our-government/public-works/engineering/. Page 38 of 617