GACHINA LANDSCAPE MANAGEMENT INC. (#2027179)

Medians, Fire Stations & Main Street Landscape Project No: PWD 26.301 Obtain a written permit from County for all such measures registered as RESTRICTED. Submit all information required to obtain permits; annual permits for regular use of control measures may be obtained as allowed by the County. Submit a Notice of Intent to the County at least 24 hours prior to the proposed time of application of all RESTRICTED materials. At the end of each month, submit a record of all control measures used to both the City and the County. This includes biological and chemical control measures; only pure fertilizers that contain no pesticides or other non-fertilizer chemicals are exempt from this requirement. Consult a representative for the County Department of Agriculture for more information. Use standard County forms for this submittal. The report must designate the chemical used, date, location, and rate for the City of Pleasanton contract sites. The Contractor must file with the City their plan for the disposal of hazardous materials, pesticides, etc., and for handling a chemical spill. Comply with County requirements regarding disposal of fertilizers, pesticides, and growth regulators. 2-08 Graffiti Graffiti shall be removed from the site within 24 hours of notification by the City. The areas requiring graffiti removal include irrigation controller enclosures, valve boxes, benches, and any other surfaces in the maintenance areas. The cost of graffiti removal shall be included in the cost of the maintenance. 2-09 Weed Abatement Quarterly or as directed by the Parks Division Manager, Contractor shall mow, string trim, or otherwise abate the potential fire hazard of weeds growing in the open space areas. The abatement shall consist of a cleared swath 30 feet in width from paved surfaces and/or fence lines. Contractor shall rake and remove the resulting debris and legally dispose of it off-site when directed to do so. SECTION 3. TURF 3-01 General The Contractor shall maintain all turf areas on the site(s) in a healthy, thriving condition by performing the following operations and other work incidental thereto: 3-02 Mowing Upright grasses shall be mowed to a uniform height of 3 inches. Mower blades shall be kept sharp so as not to damage the turf. Cut all large turf areas using a rotary riding mower. For those areas with slopes 3 to 1 or steeper, use specialty mowers specifically designed for steep slope areas. Push mowers shall only be used in those areas where a ride mower cannot be used. 3-03 Edging Turf shall be edged along borders, walls, curbs, fences, paths, rocks, etc., for neat appearance where needed. Clippings shall be removed from planting beds and walks. EXHIBIT A Docusign Envelope ID: 0CA1C663-FC9F-8542-829D-EE33675CC266Docusign Envelope ID: F7F9ED3E-EB07-824E-82A3-2EC213332F32