2003 APRIL - Laserfiche WebLink

20.24.240 _. _~ (e) Materials Not Exceeding Minimum Threshold Quantity ("Min. T.Q."). Regulated materials, which do not exceed the Min. T.Q. shall satisfy only the specific requirement estab- lished in section 89.401, and shall not otherwise be required to meet the requirements applicable to materials classified as Class I, II or III regulat- ed materials. (f) Exempt Amounts. (1) Except as provided in subsection (2) material, which would otherwise be, regu- lated is exempt from regulation under this regulation under this article if: [i] The material has an MHI less than 4,900; or [ii] The aggregate quantity of the material in a control area does not exceed the Min. T.Q., and the quanti- ty of the material in a single vessel does not exceed one (1) pound. (2) Not withstanding the exemption in sub- section (1) above, no Class I materials, regardless of the amount thereof, is exempt from the provisions relating to "flow limit- ing devices," set forth in subsection 89.201(q) nor from the provisions relating to "fire extinguishing systems," set forth in subsection 89.201(r). DIVISION IV SPECIFIC PROVISIONS SEC 89.401 (a) General. (1) The specific provisions required by this article shall be in addition to those require- ments specified in other articles of the Fire Code. The requirement for the use or in- door storage of regulated materials shall be cumulative as the hazard class of regulated material increases, in accordance with the following table: HAZARD CLASSIFICATION AND CONTROLS HAZARD CLASSIFICATION HAZARD CONTROLS Class I Includes Class I, Class II, Class III Minimum Threshold Quantity and Exempt Amount Controls Class II Includes Class II, Class III, Minimum Threshold Quantity and Exempt Amount Controls Class III Includes Class III, Minimum Threshold Quantity and Exempt Amount Controls Minimum Threshold Includes Minimum Quantity Threshold Quantity and Exempt Amount Controls. Exempt Amounts Other Applicable Statutes, Codes, and Ordinances. 710-57 (Pleasanton April 2003)