RES 00111A - Laserfiche WebLink

GUIDELINES: L1 Allow for a mix of residential units consisting of both single-family and multiple family units. Single-family housing product types include detached single- family units, attached (duet) units, townhomes and grouped units. All types of single-family lot lay-outs may be permitted so long as they achieve the objectives of the Specific Plan. Multiple-family housing product types include condominiums and apatvnents. Multiple-family projects typically are developed at densities greater than 12 dwelling units /acre. Three-story apartment projects, [he tallest allowed in the Plan, can reach densities in the ~_ 0 dwelling units/acre range. 1.2 Encourage flexibility and variety in developing the residential parcels identified in Table 3-2: Residential Development Density. Pazcels are allowed to be developed with more than one product type and density, integrating densities and product types throughout the site. - Single-family and multiple-family projects are not limited to any density range. All product types may be developed at any project density. 1.3 Notwithstanding the flexibility in housing density desired, limit the density of a particular residential project to no more than 30 dwelling units per acre. Residential Policy 2: Phase I Central Area Residential. Develop the Central Area Residential parcels with higher density multiple-family and single-family housing designed to complement the commercial/office center. GUIDELINE: 2.1 Allow a mix of housing product types at the upper density range to provide a population base within easy walking distance to the commercial/office center. Residential Policy 3: Phase I Product Types. Allow each Phase I residential parcel to be developed with a mix of single-family and multiple housing product types. 3-9