04 - Laserfiche WebLink

0012126 Not Required, CAF Compressor 0802356 Foam Refill, Pump, Foam Pro, Power-Fill FOAM REFILL PUMP A 12v pump will be permanently mounted in the pump compartment. A male quick disconnect fitting will be provided on the Left Pump Panel and a pick-up wand with a 6' tube and mating female fitting will be provided loose. The control switch for the pump will be located on the pump panel adjacent to the quick disconnect fitting. The pump will be plumbed to the foam tank allowing the user to refill the foam tank from the ground. 0031896 Demonstration, Foam System, Dealer Provided 0005447 Foam Cell, 30 Gallon, Not Reduce Water FOAM TANK The foam tank will be an integral portion of the polypropylene water tank. The cell will have a capacity of 30 gallons of foam with the intended use of Class A foam. The foam cell will not reduce the capacity of the water tank. The foam cell will have a screen in the fill dome and a breather in the lid. 0091036 Drain, 1.00" Foam Tank #1 FOAM TANK DRAIN The foam tank drain will be a 1.00" drain valve located inside the pump compartment accessible through a door on the right side pump panel. 0091079 Not Required, Foam Tank #2 0091112 Not Required, Foam Tank #2 Drain 0746445 Approval Dwg, Pump Operator's Panel, Includes Color And Label Tags The following drawing(s) will be provided for approval by the customer. The drawing(s) will be made for up One (01) Truck apparatus and/or similar Pierce job number. PUMP OPERATOR'S PANEL DRAWING A detailed drawing to scale of the pump operator's panel will be provided for the customer to review. The drawing will include all of the gauges, controls, switching, etc.., located on the pump operator's panel. The customer will be allowed to make changes and/or mark-ups to this approval drawing. The fire apparatus manufacturer will make revisions (If needed) to the drawing per the customer changes and/or mark-ups as long as the changes are physically possible within a specific product line. The finalized and signed customer approved pump operator's panel drawing will become part of the contract documents. Due to the way drain(s), bleeder(s), operational/maintenance tag(s) and NFPA required warning tag(s) are placed on pump panel(s), these items will NOT be shown on any pump panel approval drawing(s). These item(s) will be placed on pump panel(s) at the fire apparatus manufacturer discretion. COLOR CODED TAGS A detailed drawing/chart of the colors used on all of the inlet(s) and outlet(s) will be provided for the customer to review. The customer will be allowed to make changes and/or mark-ups to this approval drawing/chart. The fire apparatus manufacturer will make revisions (If needed) to the drawing per the customer changes and/or mark-ups as long as the changes are physically possible within a specific product line. The finalized and signed customer approved drawing/chart of the colors will become part of the contract documents. SPECIAL TEXT/VERBIAGE TAGS A detailed drawing/chart of the text/verbiage used on all of the inlet(s) and outlet(s) will be provided for the customer to review. The customer will be allowed to make changes and/or mark- ups to this approval drawing/chart. The fire apparatus manufacturer will make revisions (If needed) to the drawing per the customer changes and/or mark-ups as long as the changes are physically possible within a specific product line. The finalized and signed customer approved drawing/chart of the text/verbiage will become part of the contract documents. 0035570 Pump Panel Configuration, No Match Required PUMP PANEL CONFIGURATION The pump panel configuration will be neat and orderly. 0005525 Material, Pump Panels, Side Control Brushed Stainless PUMP AND GAUGE PANEL The pump and gauge panels will be constructed of stainless steel with a brushed finish. A polished aluminum trim molding will be provided on both sides of the pump panel. 53717Bid #: