ITEM 5 EXHIBITS A-H - Laserfiche WebLink

PPT PureForm LED post top PPT PureForm post top Gen 2 preliminary 02/25 page 5 of 6 Specifications Housing Two-piece sealed enclosure with main part of the housing designed as the structural and heat sink frame, enclosed by cover to give its unique form. It also includes yoke arm with arm covers. All die-cast parts are made of low- copper, die-cast aluminum alloy for a high resistance to corrosion. The sleek profile without optimized surface area allows housing to provide excellent convection heat transfer with minimum use of heat fins, giving the freedom to have a clean minimalist aesthetic design. Luminaire housing rated to IP66, tested in accordance to Section 9 of IEC 60598-1. Vibration resistance Luminaire is tested and rated Level 2 for Bridge and Overpass application (formerly 3G) cycles conforming to standards set forth by ANSI C136.31-2023. Testing includes vibration to 3G acceleration in three axes, all performed on the same luminaire. Light engine Comfort Edge technology provides low-glare, uniform illumination. Composed of LEDs strategically positioned on the edge of the optical plate. Light engine luminous opening size optimized to best achieve a balance between lumen output and optical performance with the need to provide visual comfort. LEDs are mounted directly to the housing to provide heat conduction and ensure maximized LED lifetime and performance. Light engine is RoHS compliant and available in 4 IES distribution options. Standard color temperatures: 3000K +/- 130K, 4000K+/- 130K, 5000K +/- 225K. Minimum CRI of 70. Also available in 2700K and 3500K color temperatures with extended leadtimes. Contact factory for details. Precision LED Modules are comprised of 40 count LEDs mounted to metal clad printed circuit board and sealed to a polymer optic plate to meet IP66 rating. Energy saving benefits System efficacy up to 193 lms/W with significant energy savings over Pulse Start Metal Halide luminaires. Optional control options provide added energy savings during unoccupied periods. Optical systems ComfortEdge technology provides a unique and lower perceived glare lighting solution designed to enhance visual comfort for pedestrian applications. Available in IES distribution types 2, 3, 4, and 5 available up to 17,000 lumens. Precision optics are available in type 2, 3, 4, 5 and Backlight Control (BLC) distributions available. Internal shield option mounts to LED optics to provide additional cutoff, and dedicated BLC optics provide the most stringent cutoff to meet requirements around property lines. Performance tested per LM-79 and TM-15 (IESNA) certifying its photometric performance. Luminaire designed with 0% uplight (U0 per IESNA TM-15). Mounting PureForm Post Top mounts standard to a 3" x 4" Tenon, but can also be mounted to a 2-3⁄8" x 4" Tenon if a separate sleeve is specified and shipped as separately as an accessory. Listings PPT is UL/cUL wet location listed to the UL 1598 standard, suitable for use in ambient temperatures from -40° to 40°C (-40° to 104°F). Most PureForm PPT comfort configurations are qualified under Standard DesignLights Consortium® category. Consult DLC Qualified Products list to confirm your specific luminaire selection is approved. CCTs 3000K and warmer are Dark Sky Approved. Controls 0-10V Dimming Control Options DLEA: Access to 0-10V dimming leads supplied through the yoke of the luminaire (for secondary dimming controls by others). Cannot be used with other control options. Field Adjustable Wattage Selector (FAWS): Luminaire equipped with the ability to manually adjust the wattage in the field to reduce total luminaire lumen output and light levels. Comes pre-set to the highest of 10 output positions. Consult factory for specific dimming settings for each position. BL50L2/BL50L3: Motion Response module is mounted integral to luminaire factory pre-programmed to 50% dimming when not ordered with other control options. BL50Lx options are set/operate in the following fashion: The motion sensor is set to a constant 50%. When motion is detected by the PIR sensor, the luminaire returns to full power/light output. Dimming on low is factory set to 50% with 5 minutes default in "full power" prior to dimming back to low. When no motion is detected for 5 minutes, the motion response system reduces the wattage by 50%, to 50% of the normal constant wattage reducing the light level. Other dimming settings can be provided if different dimming levels are required. Contact technical support for details. Infrared Motion Response Lenses (BL50L2/BL50L3): Lens #2 is designed for mounting heights 8' to 15'. Lens #3 is designed for higher mounting heights up to 20’ with a 40’ diameter coverage area. Microwave Motion Response (BL30MW): Motion response luminaires include a high frequency microwave sensor, 5.8GHz+/- 75MHz microwave ISM continuous wave band with 360° coverage area, <0.5 mW transmitting power and <1 W standby power. Factory programmed settings dim fixture to 30% with time delay of 5 minutes with no stand-by period. When motion is detected, the luminaire returns to 100% full light output and will remain on full power for 5 minutes. Note: The beam patterns shown are intended solely as a general guide and are not to scale. Sensing capabilities and coverage area depend on many factors including the size, speed and direction of travel of persons and vehicles; sensor mounting height; environmental and site conditions; etc. 0-10V Lighting Control Options Button Photocontrol (PCB): Button style design for internal luminaires mounting applications. The photocontrol is constructed of a high impact UV stabilized polycarbonate housing. Rated voltage of 120V or 208-277V with a load rating of 1000 VA. The photocell will turn on with 1-4Fc of ambient light. Twist-Lock Receptacle (TLR5/TLR7/ TLRPC): TLR options come with 5 pin or with 7 pins connected to 0-10V driver and not all pins will be connected. Dimming Receptacle Type B (5-pin) and Type D-24 (7-pin) in accordance to ANSI C136.41. Can be used with third-party control system. Receptacle located on top of luminaire housing. When specified with receptacle and photoelectric cell(TLRPC), 7-pin receptacle is supplier and voltage must be specified. When ordering Twist-lock receptacle (TLR5 or TLR7), photocell or shorting cap is not included. If Twistlock receptacle option is ordered with Dimming Control option, then dimming leads from driver will not be connected to TLR but consumed by selected device. Devices installed to NEMA twist-lock Receptacle must be IPX6 rated. Sensor Ready(SR)/DALI Control Options Automatic Profile Dimming (CS/CM/CE/CA): Standard dimming profiles provide flexibility towards energy savings goals while optimizing light levels during specific dark hours. Dimming profiles include two dimming settings including dim to 30% or 50% of the total lumen output. When used in combination with not programmed motion response it overrides the controller’s schedule when motion is detected. After 5 minutes with no motion, it will return to the automatic diming profile schedule. Automatic dimming profile scheduled with the following settings: • CS50/CS30: Security for 7 hours night duration (Ex., 11 PM - 6 AM) • CM50/CM30: Median for 8 hours night duration (Ex., 10 PM - 6 AM) All above profiles are calculated from mid point of the night. Dimming is set for 6 hours after the mid point and 1 or 2 hours before depending of the duration of dimming. Time clock or photocell is required for on/off functionality to allow for midpoint calculation. Cannot be used with other dimming control options. 6' 6' 6'6'12' 18'12'12'18'18' 12' 18' 24' 24' 24' 15 ft [4.6 m] Recommended max. mtg height Strong detectionrange Limiteddetection range Limited detection range Strong detection range PR E L I M I N A R Y