ITEM 5 EXHIBITS A-H - Laserfiche WebLink

PPT PureForm LED post top © 2025 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. PPT PureForm post top Gen 2 preliminary 02/25 page 6 of 6 Signify North America Corp. 400 Crossing Blvd, Suite 600 Bridgewater, NJ 08807 Telephone: 800-555-0050 Signify Canada Ltd. 281 Hillmount Road, Markham, ON, Canada L6C 2S3 Telephone: 800-668-9008 All trademarks are owned by Signify Holding or their respective owners. www.gardcolighting.com Sensor Ready Zhaga Socket Connector (SRDR): Product is D4i Certified and equipped with Sensor Ready drivers connected to 4-pin Zhaga Book 18 compliant receptacle designed for sensor and other control system applications. Receptacle is rated IP66 assembly in a compact design that provides a sealed electrical interface and rated UV resistance, mounted on underside of the luminaire, protective dust cap included. When a controller not provided by Signify is used with Sensor Ready Zhaga socket connector, the controller must be certified to work with the Xitanium SR LED drivers as part of the SR certified program. SRDR can be used with NEMA 7-pin twist lock receptacle, which is mounted on top of the luminaire. D4i certification validates compliance with specifications for data exchange in connected lighting systems, ensuring interoperability, compatibility, and efficient operation. It also assures customers that the device meets industry standards. Outdoor Interact: Scalable connected sensor with integral occupancy and daylight sensing, supports wireless mesh connectivity. Sensor works in the Foundation mode when configured without a gateway or in an Interact Advanced mode if a compatible gateway (can be added later) is used. Interact offers an app, a portal and a broad portfolio of Interact ready Indoor and Outdoor luminaires, lamps and retrofit kits all working on the same system. Startup is implemented via Interact Pro App (available in iOS® or Android®) and Bluetooth® connectivity. The aap provides flexibility to choose between a gateway or non gateway mode for setup. Setup with the gateway requires wired Internet access to the gateway. Prepare project configuration steps remotely and use IRT9015 remote accessory (ordered separately) or the App on-site to identify and group devices together. WIAP includes SR driver and SR receptacle. Daylight harvesting supported through dimming - activated via the Interact app. Sensors are available in black or white finish and high or low mounting height lenses. IP66 rated. For more information on Interact visit: www.interact-lighting.com/interactproscalablesystem SR/DALI Lighting Control Options Button Photocontrol (PCB): Button style design for internal luminaires mounting applications. The photocontrol is constructed of a high impact UV stabilized polycarbonate housing. Rated voltage of 120V or 208-277V with a load rating of 1000 VA. The photocell will turn on with 1-4Fc of ambient light. Twist-Lock Receptacle (TR5/TR7/ TLP): TLR5 includes with 5 pin (Type B) receptacle connected to SR/DALI driver all applicable connections made to driver and is not D4i compliant. TR7 includes (Type D-24) connected to SR/ DALI driver with all leads connected for use of 3rd party control systems. Receptacles are in accordance to ANSI C136.41. Receptacle located on top of luminaire housing. When specified with receptacle and photoelectric cell (TRPC), 7-pin receptacle is supplied and voltage must be specified. When ordering Twist-lock receptacle (TR5 or TR7), photocell or shorting cap is not included. Devices installed to NEMA twist-lock Receptacle must be IPX6 rated. Note: The beam patterns shown are intended solely as a general guide and are not to scale. Sensing capabilities and coverage area depend on many factors including the size, speed and direction of travel of persons and vehicles; sensor mounting height; environmental and site conditions; etc. Finish Each standard color luminaire receives a fade and abrasion resistant, electrostatically applied, thermally cured, triglycidal isocyanurate (TGIC) textured polyester powdercoat finish. The surface treatment achieves a minimum of 1000 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard. Standard colors include bronze (BZ), black (BK), white (WH), dark gray (DGY), and medium gray (MGY). Consult factory for specs on optional or custom colors. Warranty PureForm luminaires feature a 5-year limited warranty. See signify.com/warranties for complete details and exclusions. LW low sensor 0 0 7.3 m (24 ft) 4.6 m (15 ft) 2.4 m (8 ft) 4.5 m (15 ft) 1.5 m (5 ft) 7.3 m (24 ft) 4.5 m (15 ft) 1.5 m (5 ft) 7.3 m (24 ft) 4.5 m (15 ft) 1.5 m (5 ft) 7.3 m (24 ft) 4.5 m (15 ft) 1.5 m (5 ft) 0 Type 1R Type 5 Type 5CDType 3 Type 1R Type 5 Type 5CDType 3 HW high sensor 0 0 15.2 m(50 ft) 12.2 m(40 ft) 9.1 m(30 ft) 6.1 m(20 ft) 10.6 m(35 ft) 6.4m(21 ft) 4.0 m(13 ft) 15.2 m(50 ft) 10.6 m(35 ft) 6.4m(21 ft)4.0 m(13 ft) 15.2 m(50 ft)10.6 m(35 ft)6.4 m(21 ft)4.0 m(13 ft)15.2 m(50 ft)10.6 m(35 ft)6.4 m(21 ft)4.0 m(13 ft)0 Specifications PR E L I M I N A R Y