Laserfiche WebLink
<br /> <br />Small Wireless Facilities Policy (City of Pleasanton) page 28 / 47 <br />any roadway for vehicular travel or any abutting private property. If <br />applicable laws preclude flush-mounted accessory equipment, the <br />separation gap between the pole and the accessory equipment shall be no <br />greater than required for compliance with such laws and concealed by <br />opaque material (such as cabinet “flaps” or “wings”). <br /> <br />(D) Strand-Mounted Antenna Accessory Equipment. Any accessory <br />equipment mounted on the pole associated with a strand -mounted small <br />wireless facility antenna shall comply with the requirements of this Section <br />12(c)(5). All equipment and other improvements associated with a strand - <br />mounted small wireless facility must comply with all applicable health and <br />safety regulations. The approval authority shall not approve any ground- <br />mounted equipment in connection with any strand -mounted small wireless <br />facility. “Snow shoes” and other spooled fiber or cables are prohibited. <br /> <br />(6) Surface-Mounted Equipment Cabinets. This Section 12(c)(6) sets out <br />specific preferences and standards for surface-mounted accessory equipment. <br /> <br />(A) Stealth/Concealment. Concealment for surface-mounted equipment <br />cabinets will be assessed on a site-specific basis and consider the location <br />and existing uses and aesthetic elements in the vicinity. In general, the City <br />prefers surface-mounted accessory equipment to be stealth to the <br />maximum extent feasible with concealment elements as follows: (i) within a <br />landscaped parkway, median or similar location, behind or among <br />new/existing landscape or hardscape features, as approved by the approval <br />authority, and painted, powder coated, wrapped or finished in flat natural <br />colors to blend with the landscape features in accordance with City <br />requirements; (ii) if landscaping concealment is not technically feasible, <br />disguised as other street furniture adjacent to the support structure, such <br />as, for example, mailboxes, benches, trash cans and information kiosks ; <br />and (iii) if neither landscaping concealment or street furniture is available, <br />accessory equipment should be completely shrouded or placed in a cabinet <br />substantially similar in appearance to existing surface-mounted accessory <br />equipment cabinets in the vicinity. <br /> <br />(B) Public Safety. To promote and protect public health and safety and prevent <br />potential hazards hidden behind large equipment cabinets, individual <br />surface-mounted accessory equipment cabinet may not exceed four feet in <br />height or four feet in width. Surface-mounted accessory equipment <br />enclosures must be coated with anti-graffiti finishes. Surface-mounted <br />accessory equipment enclosures should not have any flat horizontal <br />surfaces greater than 1.5 square inches to prevent litter and other objects <br />placed on such equipment. <br /> <br />(d) Utilities. The provisions in this Section 12(d) are applicable to all utilities and other <br />related improvements that serve small wireless facilities. <br />Docusign Envelope ID: 51CE5BDE-55F1-4B3D-8865-17E5814CF0C5