RES 2026024 - Laserfiche WebLink

(2) Least Visible Equipment. The applicant must use the smallest and least visible antennas and accessory equipment possible to accomplish the service objectives. (3) Overall Height. All wireless facilities must be compliant with maximum overall height limits applicable to structures on the underlying parcel; provided, however, that facilities that are stealth with concealment elements pursuant to this Section 12 may exceed the applicable height limit by not more than 10 feet. (4) Equipment Mounting Height. The bottom of any antenna or accessory equipment must be mounted at least 15 feet above grade unless topography conditions warrant a different minimum height. (5) Finishes.All exterior surfaces shall be painted, colored, and/or wrapped in flat, non-reflective hues that match the underlying support structure or blend with the surrounding environment, minimizing visibility to the greatest extent feasible. All exterior surfaces on wireless facilities shall be constructed from, or coated with, graffiti-resistant materials or sealant. All finishes shall be subject to the approval authority's prior approval. (6) Setbacks. All wireless facilities must be compliant with all setback requirements applicable to structures on the underlying parcel. Additionally, all towers and other freestanding wireless facilities must be setback from adjacent public rights-of-way to the greatest extent technically feasible. (7) Noise. All wireless facilities must be compliant with all applicable noise regulations, which includes, without limitation, any noise regulations in the Municipal Code, including Chapter 9.04 (Noise Regulations) of the Municipal Code. The approval authority may require the applicant to incorporate appropriate noise-baffling materials and/or noise-mitigation strategies to avoid any ambient noise from equipment reasonably likely to exceed the applicable noise regulations. (8) Lights. Wireless facilities may not include exterior lights other than as may be required under Federal Aviation Administration, FCC or other applicable federal or state governmental regulations. All exterior lights permitted or required to be installed must be installed in locations and within enclosures that mitigates illumination impacts on other properties to the maximum extent feasible. Any lights associated with the electronic equipment shall be appropriately shielded from public view. Light beacons and lightning arresters shall not be included in the design of the wireless facility unless the applicant demonstrates the same are required by applicable laws or regulations for health and safety purposes, or by the Federal Aviation Administration. Any light beacons or lightning arresters shall be included in the overall height calculation. Wireless Telecommunications Facilities Policy (City of Pleasanton) page 17/37