Laserfiche WebLink
P18-0078, P18-0079, P18-0081, PUD-130, and Tract 8569 PC-2026-09, April 22, 2026 <br /> <br />PLANNING DIVISION – 925-931-5600 <br /> <br />Site Development and Building Design <br /> <br />7. DEVELOPMENT STANDARDS AND USES – SINGLE-FAMILY HOMES: The project <br />site shall be developed in accordance with the approved PUD Development Plan as <br />shown on the Approved Plans referenced herein. Unless otherwise specific in the <br />conditions of approval, all permitted and conditionally permitted uses shall be those <br />found in Chapter 18.32 of the Pleasanton Municipal Code (PMC). <br /> <br />a. Additions/expansions and/or filling in clearstory or loft spaces within the <br />Ponderosa subdivision (Lots 1-28) shall not be allowed. Detached accessory <br />structures and attached rear yard patio covers shall be subject to the site <br />development standards of the R-1-10,000 District of the PMC. <br /> <br />b. The two Lester properties (Lots 29 and 30) shall be subject to the development <br />standards of the R-1-20,000 District of the PMC. Project Specific Condition. <br /> <br />8. ACCESSORY DWELLING UNITS: Lots 4, 7, 15, 24, 25, and 28 shall be constructed <br />with accessory dwelling units. The plans submitted for building permits for these <br />respective lots shall reflect this requirement. Project Specific Condition. <br /> <br />9. BUILDING MATERIALS AND COLORS: The building materials and colors in the <br />Approved Plans shall be stated on the building permit plans. The body of the houses <br />shall not be white. Project Specific Condition. <br /> <br />10. PAVING MATERIALS: The color, material, design, and product specifications for the <br />paving materials used on-site shall be in conformance with the Approved Plans and <br />included with the building permit submittal. Any proposed modifications to the final <br />paving design details shall be subject to review and approval by the Planning Division <br />prior to issuance of building permits. <br /> <br />11. WINDOWS: Manufacturer type, design, material, and installation details for all windows <br />within the project shall be specified for each unit/building in conformance with the <br />Approved Plans in the building permit submittal. Any proposed modifications shall be <br />subject to review and approval by the Planning Division prior to issuance of building <br />permits. <br /> <br />12. MOCK-UP: The project developer shall set up a large material and color mock-up on <br />site to confirm conformance with the Approved Plans prior to any on- of off-site <br />modifications and shall be subject to the review and approval of the Planning Division. <br /> <br />13. FENCE/WALL: All fencing and walls shall be shown on the construction plans with the <br />building permit submittal. The design and location must be approved by the Planning <br />Division and comply with all development requirements. <br /> <br />14. OUTDOOR STORAGE: There is to be no outdoor storage without prior approval by the <br />City. <br />    <br />  <br /> <br />