PC-2026-09 - Laserfiche WebLink

P18-0078, P18-0079, P18-0081, PUD-130, and Tract 8569 PC-2026-09, April 22, 2026 15. LIGHTING AND PHOTOMETRICS PLAN: The project developer shall submit a lighting plan with the building permit submittal. The plan shall include photometric contours, manufacturer’s specifications on the fixtures, and mounting heights. All exterior lighting including landscape lighting shall be directed downward and designed or shielded so as to not shine onto neighboring properties or streets. The photometrics shall be reviewed and approved by the City Traffic Engineer and Director of Community and Economic Development prior to building permit issuance. The type and location of all exterior light fixtures shall be reviewed and approved by the Director of Community and Economic Development prior to building permit issuance. 16. BUILDING HEIGHT CERTIFICATION: The project developer shall submit a building height certification prepared by a California licensed land surveyor or civil engineer to the Director of Community and Economic Development before the first framing or structural inspection by the Building and Safety Division. The height of the structures shall be surveyed and verified as being in conformance to the approved building heights as shown on Exhibit B or as otherwise conditioned. 17. FINAL INSPECTION: Final inspection by the Planning Division is required prior to occupancy. 18. TRANSFORMERS: New electrical transformers shall be placed underground, or aboveground and screened from view to the satisfaction of the Director of Community and Economic Development. Details of the new electrical transformers, and any screening architecturally compatible with the building, shall be included in the building permit submittal and shall be subject to the review and approval of the Director of Engineering/City Engineer and Director of Community and Economic Development prior to building permit issuance. 19. MECHANICAL EQUIPMENT – SCREENING: The project developer shall effectively screen from view all ducts, meters, air conditioning equipment, and any other mechanical equipment, whether on the structure, on the ground, or on the roof, with materials architecturally compatible with the building. Screening details shall be shown on the plans submitted for building permit, the adequacy of which shall be determined by the Director of Community and Economic Development. All required screening shall be installed prior to final occupancy. 20. RECYCLING AND COMPOSTING PROGRAMS: The project shall comply with the current City/Pleasanton Garbage Service recycling and composting programs. East Bay Regional Park District (EBRPD) 21. The plans shall be revised to show and include exit spikes for the staging area. The exist spikes shall meet the specifications found here: https://www.ebparks.org/sites/default/files/410-Controlled-Vehicle-Entry- 20211011.pdf, and shall be subject to the review and approval of EBRPD staff prior to building permit issuance for the development. Project Specific Condition.