RES 95059 - Laserfiche WebLink

1) Gather all construction debris on a regular basis and place them in a dumpster or other container which is emptied or removed on a weekly basis. When appropriate, use tarps on the ground to collect fallen debris or splatters that could contribute to storm water pollution. 2) Remove all din, gravel, rubbish, refuse, and green waste from the street pavement, and storm drains adjoining the project site. During wet weather avoid driving vehicles off paved areas. 3) Broom sweep the public street pavement adjoining the project site on a daily basis. Caked-on mud or dirt shall be scraped from these areas before sweeping. 4) Never clean machinery, tools, brushes, etc., or rinse containers into a street, gutter, or storm drain. 5) Install filter materials (such as sandbags, filter fabric, etc.) at the storm drain inlet nearest the downstream side of the project site in order to retain any debris or dirt flowing into the City storm drain system. Filter materials shall be maintained and/or replaced as necessary to ensure effectiveness and to prevent street flooding. Dispose of filter particles in the trash. 6) Create a contained and covered area on the site for the storage of bags, cement, paints, flammable, oils, fertilizers, pesticicles, or any other materials used on the project site that have the potential for being discharged to the storm drain system through being windblown or in the event of a material spill. 7) Ensure that concrete/g unite supply trucks or concrete/plasterers operations do not discharge wash water into street gutters or drains. c. Construction access routes are limited to those previously approved by the City Engineer and shall be provided to all sub-contractors, delivery personnel, etc. PUD-92-4-1M: Chu/Standard Pacific April 19, 1995 Exhibit 'B ", Conditions of Approval Page 8