RES 95059 - Laserfiche WebLink

d. The developer shall submit plot plans for each of the residential lots, indicating for each lot the following information: 1) Building setbacks and a topographic plan showing grading and drainage. 2) Building pad elevations, elevations of all four (4) comers and the center of the lot, and any top- and toe-of-slope elevations. 3) Finish floor elevations. 4) The top and toe of all retaining wall elevations. 53 Public and private easements. 6) Building materials and colors. 7) Rear and side property line fences. 8) The maximum height of the structure. All residential plot plans shall show compliance with 2907(d) and 70012(d) of the Uniform Building Code. e. All conditions of approval for PUD-924 and PUD-924-1M shall be attached to all primary building permit plan check sets submitted for review and approval. These conditions of approval shall be attached at all times to any grading and construction plans kept on the project site. It is the responsibility of the applicant to ensure that the project contractor is aware of, and abides by, all conditions of approval. It is the responsibility of the applicant to ensure that the project landscape contractor is aware of, and adheres to, the approved landscape and irrigation plans. Prior approval from the Planning Department must be received before any changes are constituted in site design, grading, house design, house colors or materials, fence material, fence location, landscape material, etc. f. Prior to the issuance of building permits, the developer shall pay applicable Zone 7 and City water connection fees and water meter cost, applicable Dublin-San Ramon Services District (DSRSD) sewer connection fees, and applicable Stoneridge Drive Specific Plan contribution and reimbursement fees. The amount of the fees shall be those in effect at the time building permits are issued. PUD-924-1M: Chu/Standard Pacific April 19, 1995 Exhibit *B ', Conditions of Approval Page 4