Laserfiche WebLink
g. The soils engineer shall certify the pad compactions of all lots containing fill to the <br /> satisfaction of the Director of Building Inspection prior to the issuance of building <br /> <br /> h. The developer shall submit a pad elevation certification prepared by a licensed land <br /> surveyor or registered civil engineer to the Director of Building Inspection, <br /> certifying that the pad and building locations (setbacks) are pursuant to the approved <br /> plans, prior to receiving a foundation inspection for the structure. <br /> <br /> 4. Building and Site Design: <br /> <br /> a. The project developer shall post address numerals on the building so as to be plainly <br /> visible from the adjoining streets during both daylight and night time hours. <br /> <br /> b. With the first building permit application, the developer shall submit a fence design <br /> plan for the eight (8) building models for review and approval by the Planning <br /> Director. <br /> <br /> c. Building colors shall be consistent with the approved colors. A list of building <br /> materials and colors stating the material or color by manufacturer, product name <br /> and number shall be submitted with the first building permit application for review <br /> and approval by the Planning Director. The list of approved building materials and <br /> colors shall be attached to the CC&R's of this development. <br /> <br /> d. The developer shall change the proposed building design in the following manner: <br /> <br /> 1) On all small- and large-lot building plans, the wainscot shall be wrapped along <br /> the building sides to end at the fence. <br /> <br /> 2) On all small-lot building plans, additional wall-mounted lights shall be <br /> installed by the entry sidewalk to adequately illuminate the sidewalk and front <br /> door from the public street sidewalk. <br /> <br /> 3) On plan two and four of the small-lot building plans, the front and side <br /> elevations for models two and four shall include the front porch design <br /> elements shown in Exhibit "D" dated "Received, May 30, 1995". <br /> <br /> 4) On all "Large-lot house" plans, "grids" shall be installed on all windows and <br /> the fascia design shall be "wrapped" on all building sides. <br /> <br />PUD-924-1M: Chu/Standard Pacific April 19, 1995 <br />Exhibit 'B', Conditions of Approval Page 5 <br /> <br /> <br />