Laserfiche WebLink
~. <br />203.2 All piping in the system con- <br />forms to the piping specifications of <br />this standard. <br />203.3 Permitted by the local plumb- <br />ing or health authority. <br />Sec. 9.204 Mobile Home Water Supply <br />A water supply for a sprinklered <br />dwelling manufactured off-site shall <br />not be less than that specified on the <br />manufacturer's nameplate. <br />CHAPTER 3 System Components <br />Sec. 9.301 Valves and Drains <br />301.1 Each system shall have a <br />single control valve arranged to shut <br />off both the domestic and sprinkler <br />systems. <br />Exception: The sprinkler system <br />piping may have a separate control <br />valve where supervised by one of <br />the following methods: <br />a. To Underwriters Laboratory <br />listed central station <br />b. Local alarm service which will <br />cause the sounding of an audible <br />signal at a constantly attended <br />point. <br />301.2 Each sprinkler system shall <br />have a '/2 inch or larger drain and <br />test connection with valve on the <br />system side of the control valve and <br />flow switch. <br />20.08.049 <br />301.3 Additional drains shall be in- <br />stalled for each trapped portion <br />which is subject to freezing tempera- <br />tures. <br />301.4 One (1) -Underwriters Labo- <br />ratory (UL), Factory Mutual (FM) <br />and/or American Water Works Asso- <br />ciation (AWWA) listed check valves <br />shall be installed in each sprinkler <br />riser. Check valves shall meet City <br />water service approved list of accept- <br />able check valves that act as an ac- <br />ceptable backflow device which <br />protects the potable water system. <br />Sec. 9.303 Piping <br />303.1 Pipe or tube used in sprinkler <br />systems shall be of the materials in <br />accordance with the chemical proper- <br />ties, physical properties; dimensions <br />of the materials listed in 9.501.1 and <br />9.501.2 shall be at least equivalent to <br />the standards cited in the table and <br />designed to withstand a working <br />pressure of not less than 175 psi <br />(12.1 bars) cold water pressure. <br />303.2 Other types of pipe or tube <br />may be used, but only those inves- <br />tigated and listed for this service by <br />a testing and inspection agency labo- <br />ratory. <br />303.3 Whenever the word pipe is <br />used in this standard, it shall be <br />understood to also mean tube. <br />303.4 Fittings used in sprinkler sys- <br />tems shall be of the materials listed <br />'700_5 (Pleasanton April 2000) <br />