RES 86171 - Laserfiche WebLink

shown on City Standard Drawing No. BP-3 and provisions must be made for drainage of the vault in order to prevent flooding. Above ground fire system appurtenances (hydrants, PIV's, FDC;s) must all have concrete pads of minimum dimension 4'x 4' x 4" thick. Additionally, above ground double check detector check valves may be screened with shrubbery on one side only. Ductile iron pipe must be used in the onsite fire system for one length on each side of the Double Check Detector Check and also for the last leg of the fire system running to the sprinkler riser in the building. 3. Miscellaneous Requirements a. Where there exists the possibility that vehicles parking onsite can park parallel to curbs and reduce the usable drive aisle widths to less than 20 feet, one of the following must be shown on the plans: 1. Curbs must be painted red adjacent to drive aisles. 2. "No Parking" must be painted on the pavement at frequent locations. 3. Signs must be installed at all driveway entrances specifying that vehicles may park in designated parking stalls only. b. The colors of onsite fire appurtenances must be contrasting to building or other backdrop colors. If the color needs to be altered from red for the specific appurtenance, the new color must be indicated on the plans. c. All P.I.V.'s, O.S. & Y. valves or other valves controlling onsite fire systems are required to be supervised, per NFPA Pamphlet 13. Conduit runs from valves to the building shall be included in underground work and shall be in place prior to paving. 4. When fire protection facilities are to be installed by the developer, such facilities, including all weather surface access roads, shall be installed and made serviceable prior to and during construction. When alternative methods of protection, as approved by the Fire Marshal are provided, the above requirement may be modified or waived. Alternative methods shall be 19