Laserfiche WebLink
Testing, Sampling, and Analysis Plan <br />January 15, 2025 <br />6 <br />Zone 7 Water Agency and <br />City of Pleasanton <br />sample is under pressure and temperature similar to where it was collected, ensuring integrity. All sampler <br />chambers and parts are constructed of stainless steel. Samplers are fully decontaminated between each <br />trip into the well, further ensuring sample integrity. <br />x 2-1/8-inch OD sampler capable of collecting up to 6 liters per trip in well <br />x 1.70-inch OD sampler capable of collecting 2 liters per trip in well <br />x 1 3/8-inch OD sampler capable of collecting 1 liter per trip in well <br />The 1-3/8-inch sampler is often used with the 1-inch spinner to pass by tight restrictions, such as pump <br />bowls, column pipe that is adjacent to camera entry ports, and thru-chlorine tubing that runs below the <br />pump intake. <br />Samplers complement spinner surveys where Mass Balance calculation of analyzed constituents can be <br />used to determine the concentration at depth. We can also provide onsite analysis of particular <br />constituents. <br />A. 2.135-inch Dia. 2 Liter Fluid Sampler <br />SPECIFICATIONS AT A GLANCE <br />Diameter: 2.135-inch <br />Length: 82-inch <br />Housing: Stainless Steel Weight: 32 Lbs <br />Temperature Rating: 250 °F Pressure Rating: 5000 PSI <br />B. 1.75-inch Dia. 500 ml. Fluid Sampler <br />SPECIFICATIONS AT A GLANCE <br />Diameter: 1.75-inch <br />Length: 48.75-inch Housing: Stainless Steel Weight: 22 Lbs. <br />Temperature Rating: 250 °F <br />Pressure Rating: 5000 PSI <br />C. 1.38-inch Dia. 500 ml. Fluid Sampler <br />SPECIFICATIONS AT A GLANCE <br />Diameter: 1.38-inch <br />Length: 64-inch <br />Housing: Stainless Steel Weight: Lbs <br />Temperature Rating: 250 °F <br />Pressure Rating: 5,000 PSI