PC-2026-16 - Laserfiche WebLink

PC-2026-16 June 24, 2026 [YEAR]. [NAME], P.E., City Engineer, [DATE] (Fulfill this condition prior to plan approval.) 57. ADHERENCE TO CITY STANDARDS: All public improvements shall be designed and constructed in conformance with the City of Pleasanton Municipal Code and the City’s adopted Standard Specifications and Details in effect at the time of issuance of the permit(s). Said standards are available for download at: https://www.cityofpleasantonca.gov/our-government/public-works/engineering/ (Fulfill this condition during all aspects of design and construction.) 58. ROADWAY DESIGN STANDARDS: All roads constructed or improved by the Applicant shall conform to the design standards contained in Pleasanton Municipal Code Chapter 19.36. For standards not explicitly described in the Code, the following State of California Department of Transportation (Caltrans) standards shall be followed: Highway Design Manual, and the California Manual on Uniform Traffic Control Devices (CA MUTCD), latest editions. The City also references design standards from “A Policy on Geometric Design of Highways and Streets” (latest edition) as published by the American Association of State Highway and Transportation Officials (AASHTO). Any deviations from standards must be approved by the City Engineer. (Address this condition prior to plan approval.) 59. HOT-MIX ASPHALT PAVEMENT DESIGN STANDARDS: Public roadways and parking lots shall be surfaced with hot-mix asphalt (HMA) as designed according to Chapter 630 “Flexible Pavement” of the Caltrans Highway Design Manual, unless otherwise approved by the City Engineer. The following minimum standards shall apply to the design: a. Minimum design life = 20 years b. R-value of the underlying soil shall be R = 5 minimum. A higher R-value will be allowed only through analytic testing by a licensed geotechnical engineer or engineering geologist. c. Asphalt Binder classification shall be PG 64-10 d. Minimum Traffic Index (TI) shall be as follows. A lower TI will be considered only when justified by analytic calculations performed by a licensed civil or traffic engineer according to the Caltrans Highway Design Manual Chapter 613 i. Local Street: TImin = 5.0 ii. Residential collector street: TImin = 6.0 iii. Arterial street: TImin = 9.0 e. Minimum thickness of HMA layer = 3 inches 60. STREETLIGHTS: Streetlights to be owned and maintained by the City shall include a light-emitting diode (LED) lamp and driver compliant with UL 1598. The luminaire must be dark-sky compliant with correlated color temperature (CCT) not greater than 4,000K.