Laserfiche WebLink
RFP-2 – Scope of Work <br />RFP# PWD 25.604 City of Pleasanton, CA RFP-2 | Page 30 <br />Internal Use Only <br />E.Premise location, <br />F.Premise cycle number, <br />G.Premise meter route number, <br />H.Premise address, and <br />I.Premise status. <br />2.5.2.4 Display Unit of Measure <br />The Contractor shall ensure that the Utility User Module shows meter readings and consumption in the proper <br />Unit of Measure (UOM) and billing multiplier. All consumption shall be displayed in cubic feet. <br />2.5.2.5 Time <br />All software applications shall display time in Pacific Time (ET) and automatically adjust for daylight saving time <br />as appropriate. <br />2.5.2.6 Display Consumption <br />The Contractor shall ensure that the Utility User Module displays consumption and meter readings for historical <br />periods of the User’s choosing. Consumption shall be displayed in a tabular or graphical format and should allow <br />the User to drill down into small time intervals, down to the hourly intervals. The Contractor shall ensure that <br />the Utility User Module can display consumption in comparison to other Customers or meters or group averages <br />over the same period. The Utility User Module should allow the User to compare consumption for the same <br />Customer across different time periods (e.g., July 2024 to July 2025). The Contractor shall ensure that the Utility <br />User Module allows the User to view historical meter events, flags, and maintenance activities that have been <br />performed on the meter or AMI radio transmitter. <br />2.5.2.7 Average Consumption <br />The Contractor shall ensure that the Utility User Module displays average consumption over the period of time <br />being viewed including daily average, weekly average, current and past billing period averages. Supplier <br />acknowledges the requested functionality is not currently available but is planned for inclusion in a future <br />Platform release available on or before Q4, 2028. <br />2.5.2.8 Display of Status Codes <br />The Contractor shall ensure that the Utility User Module displays status codes of the AMI radio transmitters. <br />These status codes shall include: <br />A.Burst <br />B.Dry <br />C.Leak <br />D.Battery Low <br />E.High ambient temperature <br />F.Low ambient temperature <br />G.No consumption <br />H.Reverse <br />I.Tamper <br />J.Flow above max flow for given meter size <br />K.Meter transmission unit cannot contact the wired meter <br />Docusign Envelope ID: 6AD75F50-8A33-85A5-8039-9E3E1257A838Docusign Envelope ID: 177582DA-4F1C-8834-813C-BC4FD03AA45E